(clearance) Nickel 200 Prebuilt Coil's 10 Pieces

(clearance) Nickel 200 Prebuilt Coil's 10 Pieces

$2.69

Nickel 200 is a ferromagnetic, commercially pure (99.6%) wrought Nickel with good mechanical properties over a wide range of temperatures, high ductility, and excellent resistance to many corrosives (..

  • Ex Tax: $2.69
  • Product Code: M00000165
  • Availability: In Stock

Available Options

Nickel 200 is a ferromagnetic, commercially pure (99.6%) wrought Nickel with good mechanical properties over a wide range of temperatures, high ductility, and excellent resistance to many corrosives (in particular hydroxides). It has roughly the strength of mild steel when annealed and can provide higher strength levels when in the "as rolled" condition. One factor that affect resistance is the diameter of the coil,the thinner the wire (higher gauge number), the higher the resistance per foot. The thicker the wire (lower gauge number), the lower the resistance.

With these prebuilt coil, it will make DIY easier, there are resistances for your choice.

Ni200 0.3mm $1.95
0.05ohm
0.06ohm
0.07ohm
0.08ohm
0.09ohm
0.1ohm

Ni200 0.4mm $1.95
0.030ohm
0.035ohm
0.040ohm
0.045ohm

Ni200 0.5mm $2.95
0.020ohm
0.025ohm
0.030ohm
0.035ohm
0.040ohm
0.045ohm
Note: Only use the Nickel coils when using a temperature limiting mod. Do NOT use Nickel coils on ANY mod other than those with temperature limiting.

Write a review

Note: HTML is not translated!
    Bad           Good